Postfix et compagnie

MAIL03 Configurer Postfix

par skay Dernière mise à jour Dimanche 17 Février 2019 • 1109 consultations

 ATTENTION: Les indications de cette page sont liées à l'ensemble de la rubrique Postfix et Cie...
Vous avez pris note de l'avant-propos de cette rubrique.


Il y a encore besoin d'un certain nombre de fichiers additionnels pour finir la configuration de Postfix...

Filtrer les expéditeurs et destinataires

Dans cette optique, on va créer deux fichiers qui contiendront plus ou moins la même chose.
Il suffit de saisir les noms de domaines ou emails acceptés (OK) et ceux qui sont refusés (REJECT).
Dans cet exemple cas, les emails sur mondomaine.net et monautredomaine.com pourront recevoir des mails depuis partout et envoyer des emails partout.

# nano /etc/postfix/access_by_recipient
mondomaine.net                        OK
monautredomaine.com              OK
unautredomaine.com                 REJECT


# nano /etc/postfix/access_by_sender
mondomaine.net                        OK
monautredomaine.com              OK
unautredomaine.com                 REJECT

Les mails lents ( orange )

Si vous envoyez du mailing en volume, certains domaines de destinataires peuvent bloquer vos envois si ils sont trop nombreux et trop rapides. C'est notamment le cas du fournisseur d'accès orange / wanadoo. On prépare une liste pour les domaines lents

# nano /etc/postfix/transport
wanadoo.fr slow:
orange.fr slow:

Les messages de postfix et cie

éditer les alias système pour recevoir les alertes de Postfix et les messages administratifs par email.

# nano /etc/aliases
# /etc/aliases
mailer-daemon: root
postmaster: root
nobody: root
hostmaster: root
usenet: root
news: root
webmaster: root
www: root
ftp: root
abuse: root
noc: root
security: root
root: email@mondomaine.net
clamav: root


On prépare ensuite ces fichiers pour être utilisés par Postfix.
Si des modifications sont faites ultérieurement sur ces fichiers (ajout de domaines, alias ou autre), il sera nécessaire de les republier en saisissant la commande correspondante au fichier:

# newaliases
# postmap /etc/postfix/access_by_sender
# postmap /etc/postfix/access_by_recipient
# postmap /etc/postfix/transport

Nous avons maintenant les fichiers utiles à la configuration de Postfix.
Avant de modifier les fichiers sensibles de la configuration, on en fera une copie avec un suffixe .save qui permettra si besoin de revenir à la configuration de base.


On attaque par le main.cf

# cp /etc/postfix/main.cf /etc/postfix/main.cf.save
# nano /etc/postfix/main.cf 
biff = no
anvil_rate_time_unit = 60s
mail_name = Postfix Mail Server
myhostname = ns01.mondomaine.net
mydomain = mondomaine.net
myorigin = $mydomain
mail_owner = postfix
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
mydestination = ns01.mondomaine.net, localhost.mondomaine.net, localhost
notify_classes = resource, software
mynetworks = 127.0.0.0/8, 91.91.91.91/32
relay_domains =
recipient_delimiter = +
inet_interfaces = all
smtpd_banner = $myhostname ESMTP $mail_name (Debian)
append_dot_mydomain = no
delay_warning_time = 2h
maximal_queue_lifetime = 7d
mailbox_size_limit = 0
message_size_limit = 15728640

virtual_alias_maps = mysql:/etc/postfix/mysql/mysql_virtual_alias.cf
virtual_mailbox_base = /var/mail/virtual
virtual_mailbox_domains = mysql:/etc/postfix/mysql/mysql_virtual_domains.cf
virtual_mailbox_limit = 51200000
virtual_mailbox_maps = mysql:/etc/postfix/mysql/mysql_virtual_mailbox.cf
virtual_minimum_uid = 100
virtual_uid_maps = static:5000
virtual_gid_maps = static:5000

# Transport par dovecot
dovecot_destination_recipient_limit = 1
virtual_transport = dovecot

# Transport des mails lents ( orange )
transport_maps = hash:/etc/postfix/transport
slow_destination_recipient_limit = 10
slow_destination_concurrency_limit = 2


smtpd_helo_required = yes
allow_untrusted_routing = no
disable_vrfy_command = yes

# Securite SASL
smtpd_sasl_local_domain = $myhostname
smtpd_sasl_auth_enable = yes
smtpd_sasl_type = dovecot
smtpd_sasl_path = private/auth
# smtpd_sasl_security_options = noanonymous
broken_sasl_auth_clients = yes

# TLS server options
smtpd_tls_security_level = may
smtpd_tls_auth_only = no
smtp_enforce_tls = no
smtp_tls_enforce_peername = no
smtpd_tls_key_file = /etc/ssl_cert/sCA/private/server-key-cert.pem
smtpd_tls_cert_file = /etc/ssl_cert/sCA/private/server-key-cert.pem
smtpd_tls_CAfile = /etc/ssl_cert/sCA/certs/serverCA.crt

smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_session_cache_database = btree:/var/lib/postfix/smtpd_tls_session_cache
tls_random_source = dev:/dev/urandom
smtpd_tls_ask_ccert = yes
smtpd_tls_req_ccert = no
smtpd_tls_mandatory_protocols = !SSLv2
smtpd_tls_mandatory_ciphers = high
smtpd_tls_mandatory_exclude_ciphers = aNULL, MD5
smtp_use_tls = yes
smtp_tls_note_starttls_offer = no
smtp_tls_loglevel = 1

smtpd_recipient_restrictions =
        reject_non_fqdn_recipient,
        reject_non_fqdn_sender,
        reject_unknown_sender_domain,
        reject_unknown_recipient_domain,
        reject_invalid_hostname,
        reject_unauth_pipelining,
        reject_rbl_client zen.spamhaus.org,
        reject_rbl_client cbl.abuseat.org,
        reject_rbl_client dul.dnsbl.sorbs.net,
        reject_rbl_client bl.spamcop.net,
        reject_rbl_client b.barracudacentral.org,
        reject_rbl_client bl.spameatingmonkey.net,
        reject_rbl_client backscatter.spameatingmonkey.net,
        check_recipient_access hash:/etc/postfix/access_by_recipient,
        check_sender_access hash:/etc/postfix/access_by_sender,
        permit_sasl_authenticated,
        permit_mynetworks,
        reject

# Amavis
content_filter=smtp-amavis:[127.0.0.1]:10024
receive_override_options=no_address_mappings

Passons au master.cf

# cp /etc/postfix/master.cf /etc/postfix/master.cf.save
# nano /etc/postfix/master.cf
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#               (yes)   (yes)   (yes)   (never) (100)
# ==========================================================================
smtp      inet  n       -       -       -       -       smtpd
  -o smtpd_sender_restrictions=check_sender_access,hash:/etc/postfix/access_by_sender
#587    inet    n       -       -       -       -       smtpd

submission inet n       -       -       -       -       smtpd
  -o smtpd_tls_security_level=encrypt
  -o smtpd_sasl_auth_enable=yes

#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
#smtps     inet  n       -       -       -       -       smtpd
#  -o smtpd_tls_wrappermode=yes
#  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING

#628      inet  n       -       -       -       -       qmqpd
pickup    fifo  n       -       -       60      1       pickup
cleanup   unix  n       -       -       -       0       cleanup
qmgr      fifo  n       -       n       300     1       qmgr
#qmgr     fifo  n       -       -       300     1       oqmgr
tlsmgr    unix  -       -       -       1000?   1       tlsmgr
rewrite   unix  -       -       -       -       -       trivial-rewrite
bounce    unix  -       -       -       -       0       bounce
defer     unix  -       -       -       -       0       bounce
trace     unix  -       -       -       -       0       bounce
verify    unix  -       -       -       -       1       verify
flush     unix  n       -       -       1000?   0       flush
proxymap  unix  -       -       n       -       -       proxymap
proxywrite unix -       -       n       -       1       proxymap
smtp      unix  -       -       -       -       -       smtp

# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay     unix  -       -       -       -       -       smtp
        -o smtp_fallback_relay=
#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq     unix  n       -       -       -       -       showq
error     unix  -       -       -       -       -       error
retry     unix  -       -       -       -       -       error
discard   unix  -       -       -       -       -       discard
local     unix  -       n       n       -       -       local
virtual   unix  -       n       n       -       -       virtual
lmtp      unix  -       -       -       -       -       lmtp
anvil     unix  -       -       -       -       1       anvil
scache    unix  -       -       -       -       1       scache

slow      unix  -       -        n      -       5        smtp
        -o syslog_name=postfix-slow
        -o smtp_destination_concurrency_limit=3
        -o slow_destination_rate_delay=1

#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent.  See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop  unix  -       n       n       -       -       pipe
  flags=DRhu user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender}
#
# See the Postfix UUCP_README file for configuration details.
#
uucp      unix  -       n       n       -       -       pipe
  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail    unix  -       n       n       -       -       pipe
  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp     unix  -       n       n       -       -       pipe
  flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix  -       n       n       -       2       pipe
  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman   unix  -       n       n       -       -       pipe
  flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
  ${nexthop} ${user}

# Add this lines to be able to use dovecot as delivery agent
# Dovecot LDA
dovecot   unix  -       n       n       -       -       pipe
        flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${recipient}


# integration amavis
smtp-amavis unix -      -       -     -       2  smtp
  -o smtp_data_done_timeout=1200
  -o smtp_send_xforward_command=yes
  -o disable_dns_lookups=yes
  -o max_use=20

127.0.0.1:10025 inet n  -       -     -       -  smtpd
  -o content_filter=
  -o local_recipient_maps=
  -o relay_recipient_maps=
  -o smtpd_restriction_classes=
  -o smtpd_delay_reject=no
  -o smtpd_client_restrictions=permit_mynetworks,reject
  -o smtpd_helo_restrictions=
  -o smtpd_sender_restrictions=
  -o smtpd_recipient_restrictions=permit_mynetworks,reject
  -o smtpd_data_restrictions=reject_unauth_pipelining
  -o smtpd_end_of_data_restrictions=
  -o mynetworks=127.0.0.0/8
  -o smtpd_error_sleep_time=0
  -o smtpd_soft_error_limit=1001
  -o smtpd_hard_error_limit=1000
  -o smtpd_client_connection_count_limit=0
  -o smtpd_client_connection_rate_limit=0
  -o receive_override_options=no_header_body_checks,no_unknown_recipient_checks

smtps     inet  n       -       -       -       -       smtpd
  -o smtpd_tls_wrappermode=yes
  -o smtpd_sasl_auth_enable=yes



Commentaires

vincent le 19/07/2015 @ 16:21
merci, j'ai rectifié ça !


mick le 18/07/2015 @ 07:44  [email]
une petite virgule en trop
reject_invalid_hostname, <-




Poster un commentaire
Pseudo: (*)
email:
Site web:
Commentaire: (*)
* obligatoire

Les commentaires sont visualisés avant publication
^haut